Landscape Designer in Ann Arbor, MI: What a Design Package Actually Hands You

Homeowners who hire a landscape designer in Ann Arbor, MI often expect a picture. What a design actually produces is a set of documents that tell a build crew what to do, in what order and at what elevation, and those documents are the reason a finished property matches what was agreed.

Since 1983, Great Outdoors has been growing relationships across Ann Arbor, and that length of record is what our design team draws on before it draws anything at all. A property gets read first: soil, grade, drainage, exposure, access, and how the household actually uses the space.

This guide sets out what belongs in a design package, what a homeowner brings to the first meeting, how the design hands over to the build, and which decisions are settled on paper rather than on site.

Related: 5 Design Ideas for a Stunning Outdoor Fireplace and Outdoor Kitchen in Chelsea, MI

What Does a Landscape Design Package Contain?

A landscape design package contains four documents, and the first is a base plan: a measured record of what exists. It records property lines, the house footprint, existing trees worth keeping, utilities, existing elevations and anything that constrains the work, because nothing gets designed accurately against a sketch.

A layout plan comes next, setting the position and dimension of every proposed element. Terrace shapes, walk routes, wall alignments, step locations and bed outlines are all dimensioned so a crew sets them out rather than approximating them.

A grading and drainage plan carries the elevations. It shows where water currently goes, where it will go, what the finished levels are at every surface and how each surface meets the next, which makes it the document that prevents most of the expensive surprises.

A planting plan completes the package, specifying species, size at installation and spacing. Our landscape design team works through all four before pricing, because a number produced without them is an estimate rather than a proposal.

Why Do Elevations Matter More Than Layout in Landscape Design?

Elevations matter more because layout adjusts on site and elevations do not. A terrace shifted a foot is a morning’s correction, while a terrace set two inches above a door threshold is a problem that persists for as long as the house stands.

Water is the reason. Every hard surface added to a property is square footage that used to absorb rainfall and now sheds it, and the plan has to say where that water goes. Without stated elevations, that answer is improvised by whoever is holding the laser level.

Washtenaw County soils raise the stakes. Heavy clay in much of the area holds water rather than shedding it, so a grade that slopes away from the house does not automatically drain, and the route the water takes afterward belongs in the design. 

Our drainage solutions work starts from those stated elevations.

What Should a Homeowner Bring to the First Landscape Design Meeting?

A homeowner should bring a practical description of how the property gets used. That means how many people sit outside on an ordinary evening and at the largest gathering of the year, who cooks outside, which members of the household need a lawn, and which windows the view actually matters from.

Those answers set dimensions. A terrace sized for twelve people is a different object from one sized for four, and the difference is settled at the drawing stage rather than discovered when the furniture arrives.

An honest sense of appetite for maintenance belongs in the same conversation. Clipped hedges, seasonal containers and a formal planting scheme ask for regular attention, and a design that ignores how much a household wants to do drifts away from its intent within a few years.

Why Should the Budget Come Up at the First Design Meeting?

A budget range stated at the first meeting shapes a better design than a number withheld until pricing. The design team phases the work, chooses materials that suit the figure and sizes the scope honestly, rather than producing a plan that has to be cut back afterward.

Cutting a finished design is the expensive route, because the first things removed are usually the ones holding the rest together. Drainage, base depth and structure go first on a cost exercise, and those are precisely the items that should stay.

How Does Landscape Design Hand Over to the Build Crew?

A landscape design hands over through the documents rather than through a conversation. A crew setting out a terrace works from dimensions on a layout plan and levels on a grading plan, and anything not written down is being decided by someone in the field.

A good handover also carries the reasoning. Knowing that a particular elevation exists to keep water away from a foundation, rather than being an arbitrary number, means a crew that hits an obstruction asks the right question instead of adjusting quietly.

Our design and construction work runs under one roof for exactly that reason. The people who drew the elevations are reachable while the elevations are being built.

What Does a Planting Plan Have to Get Right?

A planting plan has to get growing conditions right before appearance. Sun exposure, drainage and wind exposure decide what survives, and a plant that wants free-draining soil struggles for two years in a heavy clay bed before giving up.

Spacing is the second, and it is where homeowners and designers most often disagree in year one. Beds planted to look full immediately are beds that need thinning by year four, and the plants removed are usually the ones that were doing the structural work.

Succession matters on any property with mature trees. A bed in full sun today sits in part shade four years later as a canopy spreads, and a plant list that ignores that shows it as thinning or as plants stretching toward light.

How Should Landscape Design Handle Phasing?

A phased landscape design puts everything buried in phase one. Grading, drainage lines, irrigation mains and conduit sleeves go in while the ground is already open, even where the features they serve are two or three years away.

Structure follows in phase two. Walls, steps and the principal surfaces set the shape of a property, and every later element is arranged against them, while building these before planting spares new beds from being walked through by a later crew.

Planting and lighting are natural final phases, because both are additive and neither disturbs what came before. A property reads as complete at the end of phase two and noticeably better at the end of phase three.

What causes trouble is phasing without a whole-property plan, because each stage then has to work around whatever the last one left behind.

Related: 7 Ways Landscape Design and a Pond Can Make Outdoor Living Feel More Peaceful in Brighton, MI

landscape designer

What Does Landscape Design Decide About Hardscape?

A landscape design decides the hardscape material, its module and the junctions between surfaces. A surface built from many small units absorbs ground movement across its joints, which is a useful property in a climate that cycles freeze and thaw through every winter.

Junctions are where a property most often looks unfinished a year later, and they are all elevations. Where a terrace meets a door, where a walk meets a drive and where a surface meets lawn each need a detail rather than an improvised solution on the day.

Edge restraint and jointing are specified here too. A paver field without proper restraint spreads at its corners first, and joint material that washes out over a few seasons lets the edges creep. 

Our paver patios have restraint and jointing specified on the drawing rather than in the field.

When Does a Property Need a Wall Rather Than a Grade?

A property needs a wall when the fall is too steep to resolve with slope alone, or when a usable flat area has to be created where none exists. A wall is a structural answer to an elevation problem, and the design decides whether the problem actually requires one.

Height changes the engineering. Low walls are largely a question of base and drainage, while taller walls bring reinforcement, geogrid and sometimes a formal design requirement into scope, at a threshold set by local code rather than by preference.

Drainage behind the structure decides its lifespan. Water trapped behind a wall through a Michigan winter is the most common cause of movement, and the detail that prevents it is invisible once backfilled. 

Our retaining walls have that drainage detailed before anything is backfilled.

How Does a Landscape Design Plan for Michigan Darkness and Winter?

A landscape design plans for winter by accepting that a Michigan property is dark for a large part of the year. A terrace with no light stops existing at five in the afternoon through the back half of the year, and designing the lighting layer alongside the hardscape keeps the space usable.

Recessed fixtures in a seat wall cap or a step riser are positioned while the masonry is being built, because the sleeve and the cable path run inside the structure. Added later, they are surface-mounted with visible cable.

Winter structure matters visually too. A planting scheme chosen only for summer leaves four months of nothing, and evergreens, seed heads, bark and the form of the hardscape are what carry a property through to spring.

How Does a Landscape Design Treat Existing Trees?

A landscape design usually treats existing trees as fixed points. A mature oak or maple on an Ann Arbor property took decades to get there and will not be replaced within the lifetime of the people looking at it, so the design generally works around it rather than through it.

The constraint is the root plate, which extends well past the canopy edge and sits shallower than most people assume. Running a base trench or an excavation through it is a decision about the tree, and a design that shifts a few feet usually keeps both.

Construction traffic does damage that shows up years later. Repeated machine passes over a root zone compacting the soil enough to starve the roots of air, and the tree declines slowly enough that nobody connects it to the project. Fencing the protection zone on the drawing prevents it.

What Changes for Plantings Underneath a Mature Canopy?

Under a mature canopy, light, water and nutrient availability all drop, and a bed placed there competes with a root system that was established first. Plant selection has to acknowledge that rather than hope, and the plants that succeed under mature canopy are a short and specific list.

Turf under a canopy is harder still. Fine fescues tolerate shade in a way that ryegrass does not, and on some properties the honest answer is a planted bed or a mulched area rather than a lawn that gets reseeded every year.

What Does Site Access Decide About a Landscape Build?

Site access decides machine size, sequence and cost. A backyard a loader reaches is a different project from one behind a narrow side gate, and that single fact affects equipment, labor and schedule more than square footage does.

Where a machine cannot get in, excavated material comes out by wheelbarrow and aggregate goes in the same way. Work that takes a morning with a skid steer takes days by hand, and the design should know which situation it is drawing for.

The route itself belongs on the plan. Heavy traffic across a lawn in wet weather compacts it badly enough to need remedial work afterward, and agreeing on the route, the protection and the reinstatement before the first delivery avoids an awkward conversation at the end.

What Should a Homeowner Ask Before Approving a Landscape Design?

A homeowner should ask four questions before approving a landscape design. Ask what the finished elevations are at every surface junction and where water goes once the new surfaces are in. Then ask what is included below grade, meaning excavation depth, base material and compaction, and which items fall in this phase rather than a later one.

A fifth question is worth asking about the planting: what the beds will look like in year three, and what has to be removed or thinned to get there. A designer who has planned for growth answers immediately.

Where a fire feature or gas appliance appears anywhere in the plan, even in a later phase, the sleeve for it belongs in this one. That is the least expensive line item on any drawing, which is why we sleeve for fire features in the first phase even when they are built in the third.

Work With a Landscape Designer in Ann Arbor, MI Who Reads the Site First

A design is worth the money when it answers questions a crew would otherwise answer in the field, and the only way to get there is to read the property properly before drawing anything. 

Our design team would rather spend the first visit on grade, drainage and how a household actually uses the space, so the drawing starts from what is really there.

Plan your landscape design in Ann Arbor, MI with Great Outdoors. Schedule your landscape design consultation with Great Outdoors.

In Summary

How long does the design stage take for an Ann Arbor, MI property?

Several weeks is typical for a full residential property in Ann Arbor, MI, and most of that is not drawing time. Site measurement, soil and drainage observation, a round or two of revisions and material selection each take their own window, and they sequence rather than overlap. Winter is the natural season for it, because none of it needs workable ground.

Can a design be used by a different contractor to build from?

A properly documented design is buildable by any competent contractor, because the dimensions and elevations are on the page rather than in someone’s head. The practical advantage of keeping design and construction together at Great Outdoors is that questions arising mid-build reach the person who set the levels rather than an assumption.

What happens if something unexpected turns up during excavation?

An unexpected find during excavation gets resolved against the plan rather than around it. A buried line, an unexpected septic field or fill where solid ground was assumed changes what is possible, and knowing the intent behind an elevation lets the design team adjust deliberately. Site investigation during design keeps those discoveries rare.

Related: How Outdoor Living & Landscape Design in Milan, MI, Is Responding to Climate and Lifestyle Shifts

About the Author:

For nearly 40 years, Great Outdoors has been growing relationships by providing high-quality residential and commercial landscaping services for the greater Southeast Michigan area. Specializing in full-service lawn care and creative outdoor living solutions, we utilize state-of-the-art equipment, high-end materials, and quality workmanship. We’ll help create the perfect yard to accent and complement your home.

Next
Next

French Drain Installation in Ann Arbor, MI Starts With a Diagnosis